STUDY OF RELAY USE ON TRANSMISSION LINES TELE SAMOSIR MAIN SUBSTATION
DOI:
https://doi.org/10.67096/modern.v1i1.51Keywords:
Usage, Function Type, and RequirementsAbstract
The electrical power system should be protected from disturbances as much as possible so that the electricity service will not be interrupted to serve consumers. If the electricity service from the producer of electrical energy to the consumer is interrupted, it will result in losses for both parties. Failures in delivering electrical energy from the producer to the consumer of electrical energy are caused by natural disturbances, living creatures, broken insulators, and others . To avoid the above disturbances, a safety device will be needed, one example is a safety relay that functions to detect and recognize abnormal conditions in the power system and take steps to ensure the automatic breaker works. The types of relays used in power system protection are varied and usually the driving quantity is an electrical signal or can also be in the form of pressure or temperature. The selection of protective equipment for transmission lines depends on the transmission system being used. Disturbances on transmission lines can originate from external sources, ultimately resulting in the interruption of power supply to loads. These disturbances can take the form of short circuits or overloads.






